skip to main
|
skip to sidebar
Rehousing the Chicken Salad Vibrato
Sunday
Removing the control knobs and the bottom panel.
No comments:
Post a Comment
Newer Post
Older Post
Home
Subscribe to:
Post Comments (Atom)
Followers
Blog Archive
▼
2009
(22)
▼
April
(22)
The Danelectro Chicken Salad Vibrato (CSV). A grea...
Here's most of the parts needed, except for a few...
Removing the control knobs and the bottom panel.
With the cover removed, you can see the small scre...
The lower PCB routes the 9v and the guitar's signa...
The photo shows the lower PCB, detached, with a s...
Now, in the top photo, I am giving the inside of t...
A closeup of the connections on the lower PCB. Fro...
The upper PCB in this photo has metal supports (ci...
The pot shells and the insides removed from their ...
This photo shows the important part of the pot mou...
Here you can see how I broke the mounting plate. O...
This is an optional step. The original CSV circuit...
Here you can see the soldered red, yellow, and blu...
Another optional step. On the underside of the upp...
In the original pedal design, there is a red LED i...
Now to the housing. The large white PCB that you s...
An aerial view of the modded CSV, with all the pot...
A closer view. As you can see, the blue and green ...
Double check that the thing works before boxing it...
Looks good, sounds good, but what if all of this i...
If you're interested in the audio benefits of all...
No comments:
Post a Comment