Here you can see how I broke the mounting plate. On the left, the red, green, and brown wires are now soldered onto the lugs. On the right, you can see where the pot used to be mounted (note the circle drawn on the PCB). This isn't an exact science, and when I was breaking the mounting plate apart, the whole schmeer just came loose from the PCB. If this happens to you, don't panic, just pay attention to where the lugs went into the PCB.

On the right, if you look closely, you'll see that there are 4 connections. I used (from the top to bottom), a green, red, lite blue, and dark blue wire. Although this pot is essentially two pots connected, only 2 of the lugs are used on each pot, so that's why you only have 4 wires, not 6.